In this article we’re going to look at how to make your own dog mask. We’ll cover the basics and then go on to look at a number of the more advanced tips and tricks that you can use.
For those who have a dog that likes to bark, and especially if your dog loves to play in the backyard and other areas of the home, you need to get them some particular dog protection.
Paper Plate 3d Dog Mask DIY Materials: This is the initial part of the set-up which will look a little scary at first, but it’s actually quite straightforward. All you’ve got to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can not simply cut a rectangular shape from the cardboard, so you will have to cut around the edge of the mask so you get something that resembles a cone. The most important thing here is to be realistic with what kind of paper plate that you’re using.
Then you will need to wrap the cardboard around the edges of the paper plate, making certain that there is a good seal between the two pieces so you can ensure that nothing will leak when you put the mask on. Make sure that the edges are cut so the edges are not sharp, as this can damage the edges of the mask.
Glue it on! The next step involves using some paint. You should spray the paint over the cardboard, making certain it runs smoothly and evenly across the whole mask. You’ll want to start with one side of the mask first, so that you can work your way round it before moving onto the other side. The paint needs to be slightly thicker than the cardboard, and it’s best that you leave about one-third of an inch of paint on the edges so that it runs over the cardboard.
Don’t https://dogsrecommend.com/dog-mask/ fret too much about the paint getting stuck to your mask. It’s easy to eliminate it later, and it will leave you with a nice finished mask to show off to everybody! It’s also a good idea to wash away any excess paint once you’re done, so that you don’t wind up with smudges or smears on your dog.
Then it is time to glue the mask onto your dog’s head. First you need to be certain that you have a secure fit between the mask and your dog’s head. As soon as you’ve made sure that it’s secure, then you can begin to glue the mask on the dog’s face. Take the piece of cardboard that is used for the foundation of the mask and then fold it over. Be certain it’s quite powerful and then use your hands to ensure the cardboard down in place.
Keep your hands out of the way and use tape to hold it in place as you repeat the process on the cardboard folds until you’ve got the mask snugged securely onto the surface of your dog. Do not make the folds too big or else it could look messy. As soon as you’ve completed this, you can then take out the mask and attach the cardboard ears. And attach the other part of the mask onto the dog. Be sure that the ears are level and be certain it’s not too short or long as this can cause some issues with the mask slipping off the dog’s face.
If you are using a dog mask because your pet security, you’ll have to do some sanding to be certain it’s safe on your dog. You can accomplish it by sanding off any excess paper which might have been removed from your mask.